Description of ZS 10/6 gun safe
The safe meets the requirements for the storage of up to ten weapons and ammunition according to Government Regulation No. 217 of 10 July 2017 on requirements for the security of weapons, ammunition, black hunting powder, smokeless powder and matches and on ammunition storage.
CONSTRUCTION
The single-walled construction of the safe is made of high-quality 3 mm thick profiled steel sheet.
A total of four anchor holes (12 mm diameter)—two reinforced in the rear wall and two in the floor—secure the cabinet against tipping and prevent easy theft.
DOOR
The bi-fold door is fitted with a certified lock according to the customer’s requirements, at least in class A according to the European standard EN 1300. The lock is locked by a three-way opening mechanism, which is operated by an ergonomic handle.
When locked, the door is secured by five 20mm diameter, deep chrome-plated steel pins locking in three directions. On the hinge side, they are secured by a strong, full-height steel profile. Thus, even cutting the hinges does not lead to their opening.
The door is sealed to the body via a foam seal, which softly dampens the sound of the door closing.
The outer hinges on the right side allow the safe door to be opened up to an angle of 200 degrees.
If necessary, the open door can be ejected to reduce the weight of the safe, for example for moving.
LOCKS
The lock is locked by a three-way release mechanism, which is operated by an ergonomic handle.
The standard certified key lock with two original keys can be supplemented or replaced by combination locks, mechanical or electronic. These have advanced features such as a time delay, the ability to mute the sound or set up a four-eye system (two codes must be entered to unlock the lock). For easy replacement, the lock’s 9V alkaline battery is hidden in the keypad on the outside of the door.
The release mechanism is equipped with a safety lock against brute force attack on the handle.
EQUIPMENT
Height-adjustable weapon holders allow independent positioning of pairs of holders within a range of 560 mm. In addition, they are forward of the rear wall thanks to a special mount, minimizing contact of the rear wall with the mounted rifle scope and other tactical weapon equipment. This makes it easy to secure sniper rifles, shotguns and shorter self-loading assault rifles. Short weapons can be conveniently stored on the shelves in the right side of the safe.
The lockable box at the top of the safe allows you to lock the extra contents with a slatted cylinder lock.
The two height-adjustable shelves can be positioned according to the hook holes with 35 mm spacing. Shelf loading capacity is 20 kg.
On the inside of the door there is a product identification label and an accessory holder.
The soft pad on the floor of the safe prevents contact of gun stocks with the steel floor.
The safe can be painted in 4 basic shades: white (RAL 9003), grey-white (RAL 7035), anthracite (RAL 7016) or black (RAL 9005), all with a textured finish.
